Various coatings for drains, convection heater ducts, apertures and conduits. Predestinated for pools. Within this section we respect the specifics of the most common requirements in particular. Every area of application comes into consideration. Another important point: Attaching the gratings strongly reduces possible danger. Our suction grating 70.95 is certified for its trait to avoid hair entanglement. And it still stands every doubt. Our gratings present themselves in the light of quality and durability. Deliveries contain many applications for a successful installation on demand. Even your special designs do not pose any problem at all.
protective grilles
protective grille 70.66
STANDARD
SAND YELLOW – BEIGE – RAL 5005 (SIGNAL BLUE) – RAL 7001 (SILVER GREY) – RAL 9010 (PURE WHITE)
made of frames made of stainless steel – gratings made of polypropylene (plastic)
Advise us of the desired measurements, please.
protective grille 70.83
made of grinded and brushed stainless steel
Advise us of the desired measurements, please.
grating measures >> 8 x 8 x 2 mm bei 66,6 % water flow
5,6 x 5,6 x 2,5 mm bei 50 % water flow
drain grate
drain grate 70.19
made of grinded and brushed stainless steel
water flow: 63,88 cm²
outer diameter: 200 mm
hole pattern: diameter: 152 mm
perforation diameter: 8 mm
drain grate 70.21
made of grinded and brushed stainless steel
water flow: 109,15 cm²
outer diameter: 240 x 240 mm (variabel)
hole pattern: diameter: 200 mm
perforation diameter: 8 mm
drain grate 70.27
made of grinded and brushed stainless steel
Water flow: 10,5 cm²
diameter: 80 mm (variabel)
thickness: 1,5 mm
drain grate 70.34
made of grinded and brushed stainless steel
water flow: 36 cm²
diameter: 140 mm (variabel)
Inner diameter: 80 mm (variabel)
wiggle wire mesh measurements: 8 x 8 x 2 mm
drain grate 70.41
casing frame enclosed on demand
made of grinded and brushed stainless steel
outer measures : 240 x 120 mm (variabel)
hole pattern : 188 x 75 mm (variabel)
drain grate 70.91
made of grinded and brushed stainless steel
measurements: 240 x 240 mm
hole pattern: perforation diameter: 3mm
drain grate 70.98
made of grinded and brushed stainless steel
diameter: 100 mm
hole pattern perforation diameter: 3 mm
crossflow grates
crossflow grate 70.88
for floor drains, adjustable height for water flow control
STANDARD COLOUR
RAL 9010 (PURE WHITE)
made of polyethylene (plastic)
water flow: < 27 cm²
outer measure : 240 x 240 mm
gutter filter
gutter filter 71.01
meant for gutter pipes |
prevents clogging through greenery influx and slipping noises
Advise us of the desired measurements, please.
grate fastener
grate fastener 70.43
made of stainless steel
Advise us of the desired measurements, please.